Back

ARRI L-Series L5-C

Introduction

Color temperature, tint and hue can be continuously adjusted from 2,800 K to 10,000K, between full plus or minus green and RGBW colors. 

The L5 addition to the L-Series perfectly complements the L7, allowing for more mobile lighting and a wider range of power classes for television studios. Its compact size and low weight allow the L5 to be rigged in tight places and hung from low ceilings. The L5 is also ideal for cramped location shoots and interview setups. Low heat allows safer and more comfortable shooting conditions. This versatility and superb light quality make the L5 a highly anticipated addition to the award-winning L-Series family.

New features available on the L5 include a PowerCON power connector and an on-board battery input that permits industry-standard batteries to power the L5 without any sacrifice in terms of features or light output. The resulting increase in portability opens up whole new application areas, giving productions with the L5 the tremendous freedom to move and work fast.

The L5 is approximately 45% brighter than a 300 watt tungsten Fresnel, but only consumes 115 watts. When compared to the L7, the L5 is half the weight and size.

STAND-MOUNT
versions include the following base configuration: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin), Inline Switch, Integrated 5-Pin DMX In and Thru.

HANGING
versions include the following base configuration: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin), 1.5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.

POLE-OPERATED
versions include the following base configuration: Pole Operation for Pan, Tilt and Focus, 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin), 1.5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.

Description

Lamphead: L5-C
Optical System: Focusable Fresnel
Lens Diameter:137 mm / 5 inch
Beam Angle: 14º -50º (Half Peak Angle)
Weight: Manual Version: 5.1 kg (11.2lbs)   Pole Op Version: 7 kg (15.4lbs)
Handling: adjustable sliding strirrup, high strength tilt lock, pole operation option (pan,tilt& focus)
Mounting: 16mm/28 mm combo pin (baby 5/8 inch/junior 1-1/8 inch combo pin
Tilt Angle: +/-90º
Power supply range:90-250 v ac,50-60 Hz
Power Consumption: 115 w Nominal
Power Connection:power CON TRUE 1 (Bare Ends/Schuko/Edison Cables Available)
Battery Connector: Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range: 23 - 36 V DC
White Light: 2800K - 10000K Continuously Variable Correlated Color Temperature
Colored Light: Full RBG+W Color Gamut with Hue and Saturation Control
Color Temperature Tolerance: +/-100K (nominal), +/-1/8 Green-Magenta (nominal)
Color Rendition:   CRI Average > 95      TLCI Average > 90
Green-Magenta Adjustment: Continuously Adjustable (Full Minusgreen to Full Plusgreen)
Dimming: 0 - 100% Continuous
Control: On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN Network Connectivity,USB-A
Remote Device Management (RDM*): DMX Setup, Hour Counter and Standard RDM Commands
Mini USB Interface: DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac USB-A
Housing Color: Blue/Silver, Black
Ambient Temperature Operation: -20 - 45ºC (-4 - 113ºF)
Protection Class: IP 20
Estimated LED Lifetime (L70): 50,000 hours
Estimated Color Shift OverLiftetime: < 200 K
Certification: CE, FCC; GS, cNRTL, CB

  • Fully Tuneable from 2,800 K - 10,000 K
  • Plus/Minusgreen correction
  • Vibrant Color Selection (RGB+W Color Gamut)
  • Hue and Saturation Control
  • High Color Rendering
  • Low Power Consumption (115 W Nominal)
  • Fully Dimmable
  • Lightweight and Compact
  • True Fresnel Lens Light Characteristics
  • On-Board Battery Connection (23 - 36V DC)
  • Onboard DMX In and Out
  • RDM Implementation
  • USB Mini Connection for Firmware Updates
  • Available in Blue/Silver and Black
  • Fan Mode Selection
  • powerCON TRUE1 Power Connector