Back

Rosco LED Litepad HO + Everywhere Kit

Introduction

  • LED Panel
  • Super Lightweight
  • Only 0.37" (8mm) Thick
  • Low Heat and Power Consumption
  • Kit: 10 Rectangular LitePads, 2 Circles
  • Transformers
  • Splitters
  • Power Cables
  • Dimmer
  • Pelican Case

Description

Rosco's LitePad is a groundbreaking LED light source for videographers, photographers and filmmakers who need a small, lightweight unit with a variety of mounting options that can light areas where standard light sources simply won't fit.

Containing 47 items this LitePad HO + Everywhere Kit (Daylight / Tungsten) is an extremely comprehensive assemblage of wafer-like, 1/3" thick HO+ fixtures. The kit is comprised of 2 sets of 5 rectangular LitePads ranging in size from 3 x 6" - 12 x 12" and a 3" circular LitePad. Rather than have you choose between daylight and tungsten balance, Rosco provides both. One set (6 LitePads) is rated at 5800K and the other has a 3600K color balance.

Rosco has all bases covered when it comes to powering the LightPads. Included in the kit are transformers which will power each light from any 100 - 240V household outlet. The provided Y Splitters and 4-Way Splitters allow you to power 2 or 4 LitePads respectively from one transformer. The 4-Pin Adapter plugs into any 4-pin (12V) power supply while the Anton Bower Adapter will draw power from supplies with a D-Tap connector. Rosco even provides a car adapter and a AA Battery Holder that uses 8 AA's (purchased separately).

The HO+ is an extremely light, some might say "featherweight" unit. The 3" circle weighs in at only 0.10 lb while the heaviest LitePad in the kit (12 x 12") is only 2 lb. With weights like these you might worry about the lights blowing away but Rosco has that covered with the included assortment of brackets and 5/8" pin adapters which mate with the huge amount of grip equipment on the market.

Lastly, it all packs away neatly in the included unbreakable wheeled, watertight case.

LitePad HO+: Slim Profile

LitePad HO+ is only 1/3" (8 mm) thick, making it one of the thinnest light fixtures in the world. Its slim profile allows the LitePad to be placed and even hidden in areas that a conventional light fixture could not fit. No thicker than a pad of paper, LitePads can easily fit into a back pack or messenger bag for easy transportation.

Soft Quality of Light

One of LitePad's most important attributes is the quality of light it produces. LitePad outputs a soft, even beam of light which is perfect for filling in shadows, creating "beauty" light, or to mimic a practical light in the scene. LitePad has been hailed as the perfect "get me out of trouble" light because little needs to be done when using LitePad in order to make it produce beautiful light.

Low Heat

Because LitePad is an LED light source, the amount of heat generated is very low. In the center of the LitePad, the unit is cool to the touch. The edges, where the LEDs are located, are only slightly warm. This means that LitePads can be left on all day in a small set without making the room unbearable to work in.

Lightweight

Weighing significantly less than a conventional light source, the LitePad HO+ is capable of being mounted in many different ways and places. Whether it be Rosco's mounting brackets, touch fasteners, or even rubber bands, LitePad's low weight makes it incredibly easy to mount and makes carrying a few of them around a breeze.

Minimal Power Consumption

With each LED only consuming a quarter of a watt, LitePad is an extremely energy efficient light source. There is no longer the need for kilowatts of power or a generator to power a set full of lights. A few dozen LitePads can easily run off of available household power.

Easy on the Eyes

Unlike many LED sources, LitePad is a bounced LED light - not an array of LEDs pointing directly forward. Performers or technicians can look directly into LitePad without squinting, hurting their eyes or getting a headache.

Brightness

LitePad HO+ offers the brightest LitePad to date. With LEDs on all four edges of all standard sizes, LitePad HO+ gives you the maximum output in the smallest of spaces.

Dimmable

LitePads are a fully dimmable LED product. The proprietary Single Fader Dimmer and 2 CH / DMX Dimmer can smoothly dim any standard size LitePad with no color temperature change. With LitePad's dimmers, you are able to set the exact light intensity you need.

Interior Connector

LitePad's new interior connector eliminates the traditional wire, which had the potential to be pulled out during use. Based on user feedback, this feature was introduced to make the LitePad more rugged and easier to use.

Daylight / Tungsten

LitePadLitePad HO+ is available in two color temperatures, daylight (approx. 5800K) and tungsten (approx. 3600K). With tungsten and daylight LitePads, which have equal light output, there is no need to color correct your LitePad, losing valuable light intensity. LitePad's minimum green content allows for high color rendering and great film and digital photography.

Source

LED

Color Temperature

3,600K and 5,800K (both included in kit)

Light Output

At 18" (457.2 mm)
3" circle: 9 fc 
3 x 6": 23 fc 
3 x 12": 37 fc
6 x 6": 34 fc
6 x 12": 60 fc
12 x 12": 90 fc

Lamp Life

60,000 hours

Power

12V DC input

Operating Temperature

-22 - 185°F (-30 - +85°C)

Dimensions

Circle 3" (diameter) x 0.37"  (76.2 x 9.4 mm)
3 x 6 x 0.37" (76.2 x 152.4  x 9.4 mm)
3 x 12 x 0.37" (76.2 x 304.8 x 9.4 mm)
6 x 6 x 0.37" (152.4 x 152.4 x 9.4 mm)
6 x 12 x 0.37" (152.4 x 304.8 x 9.4 mm)
12 x 12 x 0.37" (304.8 x 304.8 x 9.4 mm)

Weight

3" Circle: 0.10 lb (0.04 kg)
3 x 6": 0.30 lb (0.13 kg)
3 x 12": 0.55 lb (0.25 kg)
6 x 6": 0.55 lb (0.25 kg)
6 x 12": 1.10 lb (0.50 kg)
12 x 12": 2.15 lb (0.97 kg)