Back

DMX 12 Channel Master Dimmer

Introduction

Master series are the most powerful digital dimmers in our product range. Ideal for theatres, concerts, stage works, discos and any other professional places where the reliable quality must come with affordable price. These dimmers contain four RISC microprocessors with multiprocessor communication to make a 100% duty cycle power pack. The output power is controlled by TRIACs with digital phase angle control. The rising of the output current and the resulting distortion can decrease by special filters.

Description

  • 12×2.3 kW (12×10 A) and 6×5.7 kW (6×25 A) models
  • True200μs rise time filtering (True400μs with TV option)
  • Easy menu control with five push buttons and large blue LCD
  • Control signals indicated on LCD and by green LEDs
  • AC outputs indicated by yellow LEDs
  • Global DMX address set or SoftPatch
  • Individually selectable parameters per channel:
  • PreHeat
  • MaxLevel
  • Control curves (Voltage Linear, Phase-Angle Linear, Square, Fluorescent, Switch and User-Editable)
  • DMX Address (SoftPatch)
  • Incoming DMX level display for monitoring
  • Test function to check channels one by one
  • User editable 40-step sequence for standalone mode with DMX Record option
  • Internal fan with two speeds depending on internal heat (for low noise operation)
  • Overheat protection
  • Overload protection by circuit breakers (1P or optionally 1P+N)
  • SoftFlash handling to eliminate MCB strikedown
  • DMX-512 (DMX-512A ready) and optional analogue (0-10 V) control
  • Optional 10 V output for small analog control desks
  • Factory reset to restore all parameters
  • Option for backside XLR connectors
Mains
(12×2.3kW model)
3P+N+PE (230V/400V Star 50 or 60 Hz) 3×40A via 1.5 m length 5×6 mm² H07 rubber cable without CEE plug
Output current / Filtering
(12×2,3kW model)
12×10A / 200μs (400μs with the TV option)
(between 10%-90% at full load and 90° phase-angle)
Mains
(6x5,7kW model)
3P+N+PE (230V/400V Star 50 or 60 Hz) 3×50A via 1.5 m length 5×10 mm² H07 rubber cable without CEE plug
Output current / Filtering
(6×5,7kW model)
6×25A / 200μs (400μs with the TV option)
(between 10%-90% at full load and 90° phase-angle)
Control connectors 5-pole XLR Input-Throughput for DMX-512 (optically and power isolated)
15-pole SUB-D male for analogue inputs (optional)
Protections
  • Inputs are EFT/ESD/Surge protected according to EN 61000-6-2
  • 1P (optionally 1P+N) Icn 4.5 kA circuit breakers on the outputs (Icn 6 kA on request)
  • Internal thermal protection against overheat
Corrosion protection Electrostatic sintering (RAL9005)
Operating temperature 0 °C to 35 °C (RH: 0-90%, non-condensing)
 Dimensions 19” rack 3U 484×132×350 (W×H×D in mm + connectors)
Package dimensions: 620×620×230 (W×H×D in mm) 
 Weight 17 kg (net), 19 kg (gross)
23 kg (net), 25 kg (gross) with TV option.